How To Fix Number Plate

By: Andreea Putinelu

Last updated: 18 April 2019

You lot might be because fitting number plates for a number of reasons. Perhaps y'all want to alter your current number plate for a private ane, or perhaps your number plate has been stolen. No thing the reason, if you are looking for means to replace your reg plates, this guide should stand you in good stead.

Note: This blog will not explain how to learn a number plate, for more information on what do y'all demand to get a number plate made check out our mail.

one. Remove number plate from car

The get-go step is to remove your previous number plate (if there is one). Here is how to remove a number plate:

Begin past opening the plastic screw covers, if there are any. Subsequently that you simply disengage the screws. In some instances, you may find double sided pads securing the plate, in which case you will need to loosen that. Be aware that this process might take a while due to the fact those pads tend to be very adhesive. Don't be afraid to apply equally much force as needed in that case. Simultaneously, you can apply any tool yous have at hand to help you loosen it.

After removing your license plate, you will demand to decide whether you lot will fit your number plates with screws or adhesive record.

Paradigm credit: Studio 72 / Shutterstock

2. Drill holes into your number plate

If you are fitting your number plate with screws, y'all will need to drill holes into information technology. There are a couple of ways to practise so, and there are mixed opinions on what the all-time way is. One style to do information technology is by drilling the holes from the dorsum. This is the recommended way to practise it past virtually manufacturers. The other style is by drilling it from the front after applying masking tape on the plate.

To make certain yous go the positioning right, y'all can use your previous number plate as a template.

3. Secure number plate with screws

Screw the reg plate onto your automobile using either your old screws or new ones. Make sure it's secured tightly in identify.

If you lot're fitting a number plate without screws (using double-sided agglutinative tape)

Epitome credit: Ekaterina43 / Shutterstock

2. Clear number plate and mounting surface

If you're using double-sided adhesive tape, the 2nd step would be in this instance to make clean the mounting surface and the back of the new number plate. This is an of import step, equally it will ensure that the sticky pads adhere to both your plate and the car more finer.

3. Fix sticky pads to your number plate

After you lot've cleaned your surfaces thoroughly, it'due south time to remove the adhesive pads from their packaging on one side, and stick this to the dorsum of your number plate. Next, remove the backing of the sticky pad on the side that you will fix onto your car. Be careful not to touch the adhesive as it could impair its stickiness!

Note: The number of agglutinative pads you lot use information technology upwards to you, the more you apply the more secure the number plate will be. Still, by using lots of adhesive information technology will be harder to change your number plate in the future.

4. Press number plate onto your motorcar

Once you have positioned your number plate correctly, but press equally hard equally you can, for a minimum of x seconds, to ensure the number plate is secured.

For more than information on fitting your personalised plate, don't hesitate to contact us.

Feature prototype credit: Andrey_Popov/Shutterstock

Mail comments...