Download Article

Download Article

Tinting your windows is a great way to proceed your car shaded on especially sunny days. Window tint is a special blazon of moving picture that simply lasts for a few years, so y'all may brainstorm to notice some bubbles or creases forming along the edges of your windows.[1] As annoying as these wrinkles are, they're super like shooting fish in a barrel to set up. While yous should ever consult a car detailed with major concerns, you can fix modest wrinkles and bubbles in a matter of minutes.

  1. 1

    Spritz over the wrinkled edges of tint with h2o. Fill a spray bottle with a mixture of distilled, lukewarm water and a pea-sized amount of liquid soap. Search along the edges of your motorcar window for any obvious wrinkles, or other areas where the tinting looks bumpy and uneven. Spray the soapy water along these edges so the tint can loosen.[2]

    • Some tints will last longer than others. If you used a cheap tint to cover your windows, you may offset seeing wrinkles within a year or 2.

  2. ii

    Elevator the wrinkled tint away from the window. Pinch and pull the damp, wrinkled section of tint edges up and away from the window with your fingers. Don't elevator the entire tint section—only skin abroad the surface area that'south really wrinkled or bubbly.[3]

    Advertisement

  3. 3

    Spray soapy water on both the window and the inside of the peeled tint. Cover the entire wrinkly section of tint with soapy h2o, along with the matching portion of window. Y'all may need to hold the tint in ane hand while you lot spray over the inner section.[4]

    • This process will get in easier to reapply the wrinkled tint.

  4. four

    Arrange the tint so it fits evenly over the window. Pinch the edges of the wet tint and concur it upwardly to the edges of your car window. Make sure that all the edges line up, so you tin can reapply your tint as smoothly as possible.[v]

  5. v

    Printing the tint onto the damp window with a squeegee. Concur your squeegee forth the bottom of the peeled tint, then elevate it upwards. Repeat this procedure several times until the tint is firmly fastened to the rest of the window.[6]

    • Always apply an fifty-fifty amount of force per unit area to squeegee as you stick the tint to the window. This helps the movie to look equally smooth as possible.

  6. 6

    Wait one hr for the tint to dry. Set a timer for about an hour and get about the remainder of your solar day. Don't drive your car anywhere—instead, requite the pic plenty of time to air-dry. If this doesn't piece of work, try spritzing and squeegeeing the tint once more and letting information technology dry.[7]

    7. Advertising

  1. 1

    Turn on your heat gun to the highest setting. Plug your heat gun into an outlet about your automobile and adjust the temperature punch. Bank check that it's turned up the highest possible setting, or somewhere around 1,100 °F (593 °C).

    • You demand a rut gun for the repair to work properly. While blow dryers can get pretty hot, heat guns are a much ameliorate tool for the task.
    • If you don't have a heat gun, you can buy one online or in a hardware store.
    • Ever employ a lot of caution when working with a heat gun. If the heat touches your skin, you lot could go seriously burned.

  2. 2

    Hold your oestrus gun effectually 3 in (vii.6 cm) to the left the window's edge. Your rut gun is really strong, so you don't desire it to cook or warp the rubber seal along the side of your car window. Instead, move your heat gun to the left of the contraction, which makes the creases and bubbling easier to remove.[8]

    • Whenever you lot work with a oestrus gun, hold it at least 2 in (5.1 cm) away from the window tint.[nine]

  3. three

    Hold your fingers against the window to run into if it's hot. Lightly tap the fingers of your reverse hand forth the drinking glass while applying heat to the tint. Remove your fingers once the window is uncomfortably hot, then turn your heat gun off.[10]

    • To protect your fingers, consider wearing a pair of sturdy, flame retardant piece of work gloves.

  4. four

    Press upwards forth the edge of the tint with a credit carte. Find the exact spot where the crease or contraction is on your tint and identify your chiseler directly below information technology. Push button the menu in curt, smooth, outward motions, working your way to the side of the machine window. With the window tint still warm, you can get rid of the wrinkles and bubbles with the credit carte du jour.[eleven]

    • Ever work forth the edge of the window.

    5. Advertisement

Add New Question

  • Question

    How practise you lot remove tint lines?

    Filip Boksa

    Filip Boksa is the CEO and Founder of King of Maids, a U.Due south. based dwelling house cleaning service that helps clients with cleaning and organization.

    Filip Boksa

    House Cleaning Professional

    Expert Answer

    Support wikiHow by unlocking this expert reply.

    To clean tinted windows, it is important to use the correct chemicals. Vinegar and water is all-time; all the same, anything that is ammonia-costless will piece of work. Apply the solution with a microfiber rag for a flawless finish.

Enquire a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Ad

  • If y'all're dealing with a tiny bubble, you tin pop it with a sewing needle and then use a credit card to buff and smooth out the surface area.[12]

Advertizing

Things Yous'll Need

  • Distilled water
  • Liquid lather
  • Spray bottle
  • Squeegee
  • Heat gun
  • Credit card
  • Work gloves (optional)

References

About This Article

Thanks to all authors for creating a page that has been read 17,094 times.

Did this article help yous?